Martin MX-4 Stage Effects Light

Description

Martin MX-4 scanner 150w Used
MX-4 is a bright and powerful scanner with a 150W discharge 6000 hour lamp. Using an ultra-fast strobe effect and individual color and gobo wheels it is the perfect choice for today's cutting edge DJs.
• 150W discharge lamp
• 6000 hour lamp included
• Fast and precise mirror movement
• 15 colors + 2 split colors + white
• 19 gobos
• Individual wheels for gobos and colors
• Separate shutter for fast strobe effect
• Futuristic and light-weight design
• DMX or stand-alone mode
MX-4 SPECIFICATIONS
Print
Description
The MX-4 is an automated profile spotlight that employs a long-life 150 watt discharge lamp. It provides 15 full and 2 split colors, 19 gobos, high-speed shutter, 230° of pan and 76° of tilt, adjustable focus, and a 16° beam angle. It may be operated with DMX controllers, the Martin MC-1 remote control, or as a stand-alone unit with master/slave capability.
Physical
Length: 537 mm (21.1 in)
Width: 269 mm (10.6 in)
Height: 263 mm (10.4 in)
Weight: 8.8 kg (19.4 lbs)
Source
Lamp: 150 W discharge with G 12 base
Models: Philips CDM-SA/T, GE Arcstream
Alternate lamp: 150 W discharge with GY 9.5 base (conversion required) ...
Alternate models: GE CSS, OSRAM HTI, Martin Metal Halide
Photometrics (Standard)
Light output (w/ CDM-SA/T): 1030 lumens
Illuminance (lux or fc): 25,790 cd/distance2 (m or ft)
Diameter: 0.28 x distance
Beam angle: 16°
Measurement conditions: 230 V, 50 Hz; no effects applied
Measurement source: Philips CDM-SA/T 150
Electromechanical effects
Color wheel: 15 full colors, 2 split colors, open; split positions
Gobo wheel: 19 gobos + open
Shutter: variable strobe from 1.5 to 13.5 flashes per second
Manual focus: 2 m to infinity
Pan: 230°
Tilt: 76.5°
Control & Programming
Control options: DMX-512, MC-1, stand-alone, master/slave
Stand-alone trigger options: automatic & music
Transceiver: RS-485
Setting and addressing: DIP-switch
Firmware update: AVR Programmer upload
DMX speed control: tracking and vector
DMX channels: 1 / 6 / 7
Data I/O: 3-pin XLR; pin 1 shield, pin 2 cold (-), pin 3 hot (+)
Installation
Mounting points: One 13 mm hole and four 6 mm holes in mounting bracket
Orientation: any
Minimum distance to combustible materials: 0.1 m (4 in)
Minimum distance to illuminated surfaces: 0.3 m (12 in)
Minimum clearance around fan and air vents: 0.1 m (4 in)
Thermal
Maximum ambient temperature (Ta): 40° C (104° F)
Maximum surface temperature: 65° C (149° F)
Total heat dissipation: 680 Btu/hr
AC Supply
AC input: 3-pin IEC male socket
Wiring options: 100/120/210/230/250 V, 50-60 Hz
Maximum power and current
100 V: 205 W, 2.6 A
120 V: 205 W, 2.0 A
210 V: 190 W, 1.2 A
230 V: 190 W, 1.0 A
245 V: 200 W, 1.0 A
Design standards
EU EMC: EN 50 081-1, EN 50 082-1
EU safety: EN 60598-1, EN 60598-2-17
Canadian safety: CSA C22.2 NO 166
US safety: ANSI/UL 1573
Construction
Housing: UV-resistant fiber-reinforced composite
Finish: integral color or polyurethane coating
Protection factor: IP 20
Ordering information
MX-4, black: 90140400
MX-4, titanium: 90140430
Accessories
MC-1 Controller, EU: 90718000
MC-1 Controller, US: 90718100
G-clamp: 91602003
Half-coupler clamp: 91602005
Included items
Mains cable: 3 m, IEC female, P/N 11501013
Lamp: Philips CDM-SA/T 150W, P/N 97010111
User manual: P/N 35000077
Sample project specification
General
The luminaire shall be an automated 150 watt profile spotlight with moving-mirror, color filters, gobos, and mechanical shutter. The luminaire shall be the Martin MX-4.
Mechanical effects
The luminaire shall provide two overlapping wheels for the insertion of color filters and gobos. The first wheel shall provide 15 monochrome filters, two multicolor filters, and an open position. The second wheel shall provide 19 gobos and an open position.
The luminaire shall block light output and provide flash effects at speeds up to 13 flashes-per-second by means of a mechanical shutter.
The mirror shall pan 230° and tilt 76.5°.
Control
The luminaire shall respond to command signals conforming to the USITT DMX512 (1990) standard and shall have locking 3-pole XLR connectors for input and throughput of serial data.
Housing
The luminaire shall be constructed of sheet steel and aluminum. The covers shall be constructed of a UV-resistant fiber-reinforced composite material with integral black color. The finish of the covers shall natural black or an applied titanium color polyurethane coating.
Installation
The luminaire shall operate in any orientation. It shall have a mounting bracket with a dedicated mounting point to which a mounting clamp may be bolted. When installed above floor level, a means of secondary attachment shall be employed.
Electrical
The luminaire shall be capable of operation on 50 and 60 Hz supplies at 100, 120, 210, 230, and 250 volts, plus/minus five percent. It shall be fitted with a three-prong male IEC socket for connection to AC power. The luminaire shall be electrically grounded.
The luminaire shall conform to CE safety standards EN 60598-1 and EN 60598-2-17, and to CE electromagnetic compatibility standards EN 50 081-1 and EN 50 082-1. The luminaire shall conform to CSA standard C22.2 No. 166 and ANSI/UL standard 1573.
Environmental
The luminaire shall be located in a dry area in which the ambient temperature does not exceed 40° C (104° F).
Physical
Size: 537 x 269 x 263 mm (21.1 x 10.6 x 10.4 in.).
Weight: 8.8 kg (19.4 lbs).