Innovo Bluetooth CMS 50F Plus Oxygen Monitor Wrist Pulse Oximeter O2 SpO2 Meter

Description

NEWLY UPGRADED BLUETOOTH ENABLED
- Innovo® CMS 50F PLUS Wrist Pulse Oximeter. Comes with a dramatically improved Innovo® SnugFit probe that will greatly enhance your experience with the CMS 50F. The Bluetooth function frees up the only USB port on the wrist watch and allows you to record your SpO2 and pulse rate in real time.
NEXT-GENERATIONAL
- Contains advanced OLED light and sensor capable of measuring SpO2 and Pulse Rate (PR) at low blood perfusion with extreme precision. (Please note: Due to the increased sensitivity of the probe, the finger must remain absolutely stationary while inside the probe. Not suitable for continuous monitoring of SpO2 levels if the body is in constant motion).
SNUGFIT PROBE FOR IMPROVED COMFORT
- The tensile strength has been increased slightly to ensure a tighter fit to the finger during prolong use without restricting blood flow. The probe is now made of silicon instead of latex to ensure a comfortable and hypoallergenic experience for the user. These improvements easily make the Innovo ® SnugFit a much more reliable and superior choice compared to the previous Contec probe.
MONITOR HEALTH DATA
- Real time, continuous monitoring of SpO2 and PR during sleep and aviation - Includes advanced software to analyze the data.
ALARM FUNCTION
- Auditory and visual alarm when pulse rate or SpO2 falls below set levels
The CMS 50F wrist pulse oximeter comes with a newly designed Innovo® SnugFit probe that can measure blood oxygen saturation (SpO2) and pulse rate through your fingertip with extreme precision. It also contains a built in auditory and visual alarm that warns you if the oximeter is not place correctly on the finger, the battery is low or when your SpO2 is beyond set limits. This allows athletes to fully concentrate on their activities. The CMS 50F also has the ability to store 24 hours of data, which can be uploaded to a computer for analysis if one wishes. This is extremely helpful to aviators who want to monitor their SpO2 and pulse performance during long flights. Superior 256K color OLED screen with rotational display allows you to see the readings clearly and conveniently. The device charges when connected to a computer or to the power supply via the provided power adaptor.
Features
Extremely fast, sensitive and accurate
Lightweight (About 50g with lithium battery)
Built in auditory and visual alarm
256k color OLED display with rotational display
Synchronous display on the oximeter and computer
Powerful 3.7V Rechargeable Lithium battery and a charger with USB interface
Free software to upload and analyze up to 24 hours of data at a time (Windows XP, Windows 7, and Vista Compatible)
Automatic power-off after 5 seconds without signal
Bluetooth CMS 50F Plus Installation Steps:
1. Install the SpO2 Assistant program on your computer
2. Turn on the pulse oximeter
3. Make sure you set the "wireless" option on the menu to "on".
4. Follow the instructions according to the video below (Bluetooth)
5. If you cannot see “wireless” being detected by the SpO2 assistant, then your laptop/PC does not have Bluetooth capability.
6. If so, please connect the CMS 50FW via the USB cable (as shown on the video below)
Warning! This is NOT a medical device! For Sports/Aviation use only