Engine Carbon Deposit Cleaner Car Intake Pipe Valve Carbon Cleaning Machine 110V

Description

Store category
Sign Up Now !
You may also like
Engine Carbon Deposit Cleaner Car Intake Pipe Valve Carbon Cleaning Machine 110V
Product Description
AUTOOL HTS558 Automotive Engine Intake Pipe Valve Clean Machine
Valvetronic System Walnut Powder Sand Carbon Deposition Cleaner
AUTOOL HTS 558 Walnut Sand Decarbonizing Machine
is sprayed into the engine intake pipe through high-pressure airflow, and the high-pressure high-speed sand will roll and collide in the closed intake pipe, thereby impacting the carbon deposit on the intake valve and the cylinder wall. Then, the walnut sand and carbon deposit mixture are recycled to the dust bucket through a special joint.
Feature:
1.【Deep removal of carbon deposits】Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.（Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio.)
2.【External air source】This enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.
3.【Built-in dust filter】It can separate the recovered walnut sand grit from carbon deposits for recycling.
4.【Integrated design】The walnut sand grit can be sprayed and recovered simultaneously.
5.【3 year warranty】For damage caused by non-human factors, we promise to resend parts for free within 3 years.
What is carbon deposition?
There are some hydrocarbon olefin residues attach on engine intake,cylinder when fuel burn in engine not completely.
These residues change into hard black shell in high temperature condition , that called carbon deposition.
Why need clean carbon deposition?
Carbon deposition will decrease air-fuel ratio, cut down engine output power, increase fuel consumption, engine drastic shake on idle status...
all the thing will hurt engine deeply.
So normally we should clean carbon deposition after every 40000-50000 kilometer trip
What is walnut powder(sand)?
Crash walnut shell into powder, after a vigorous selection process then we get walnut sand.
It show high performance in the three area: hardness, anti-pressure, wear-resisting.
A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive.
It was hardly dissolved in acid, alkali and water.
Walnut sand is a pure natural polish material, its hardness was lower than metal but higher than carbon deposition,
it will clean intake pipe and back side of intake valve thoroughly but no damag
Recommend
Reason:
1 Air pump pressure should more than 0.7Mpa (7bar/102PSI)
2 Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB)
3 Cleaning time between 1-3 minutes
Bullet point:
AUTOOL HTS558 is a special machine for engine Intake pipe and intake valve back side clean.
Close intake valve, then spray walnut powder into engine intake via air pump(not include), meanwhile HTS558 will recycle walnut powder by vacuum.
This is a closed loop. Walnut powder will impact carbon deposition on inner wall of intake pipe. After thousands of impact, carbon deposition will be clear thoroughly.
Chemical cleaning agent will corrodes pipe and shortens the lifetime of engine.
Walnut powder is pure natural polish material. It show high performance in hardness, anti-pressure and wear-resisting.
Walnut powder hardness was lower than metal but higher than carbon deposition. Take these advatages,
AUTOOL HTS558 will clean clean intake pipe and back side of intake valve thoroughly but no damage
High-precision engine system is sensitive to foreign matter of intake pipe, such as BMW valvetronic system.
That is why we need AUTOOL HTS558 to clean carbon deposition in intake pipe. Engine should be closed before clean,
then turn crankshaft to close intake valve. AUTOOL HTS558 clean one intake pipe
each time,
6 cylinder engine should cleaned 6 times one by one(and so on)
AUTOOL HTS558 is specail for intake pipe and intake valve back side clean only,
if you want to clean carbon deposition on injector/throttle valve/cylinder, please choose AUTOOL CT150,AUTOOL CT200 or AUTOOL C100.
Walnut powder not include in package,please get it in local market;
High pressure air pump is requirement(not include in package);
Walnut powder residual in intake pipe will go to ashes in high temperature after engine start.
How to use?
1 Open head cover of AUTOOL HTS558 and pour into walnut powder (need 2- 4KG ), press dust guard on walnut powder then close cover
2 Join spary gun muzzle and recycle hose together (there is a hole on recycle hose)
3 Remove intake manifold of engine, plug spary gun into intake, turn crankshaft to close intake valve.
Connect high pressure air pump((not include)) to HTS558
4 Connect AC power, start clean. The process should last 1-3 minutes (depending on carbon deposition circumstances)
5 Close AUTOOL HTS558, check up cleaning result. Normally, walnut powder
can be reuse 5-10 times(depending on carbon deposition circumstances)
Specification:
Package include:
1x AUTOOL HTS558 cleaning machine
2x Spray gun
1x Goggles
1x Recycle hose
1x Recycle hose and spray gun connector
Payment
Delivery details
Return Policy
About us
Contact us
Payment
1. We accept
PayPal
only.
2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal.
3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable.
4. Please make the payment within 3 days.
Delivery details
1. We ship to WORLDWIDE .
2. Item will be shipped out within 1-2 working days (except weekends and holidays) after the payment is cleared or received.
3. We will send item to your Confirmed Shipping Address in Paypal only.Please confirm your order and address before you bid or pay the item.
4.International Buyers Please Note: 1)Please check with your country customs office to determine what these additional costs will be prior to bidding / buying.
2)Import duties
, taxes and charges are the buyer’s responsibility,please understand.
Return Policy
Item may be returned for refund or replacement within 30 days of the purchase date.
Defective products may be returned for repair up to 1 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.
Before any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense. The buyer is responsible for the cost of returning any merchandise.
About us
We are a professional worldwide Professional company.
We are reliable supplier to both wholesalers and retail sellers. We supply many products on Automobile consumer.Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
Contact us
Our normal business hour is Monday to Friday 9:00 AM to 6:00 PM Beijing TIME. Please email me through "MY MESSAGES" on eBay, if you have any questions about our listings or inventory or troubles. All messages be reply within 24 hours. Welcome your any-time parchase!
Feedback