Car Tester Detector with Two Holes Ignition Plug Analyzer O8Q7

Description

Car tester detector with dual testing holes. In automobile ignition system, the high-voltage ignition coil generates a high-voltage (10000 volts or more), and the diverts it form high-tension ignition coil into the cylinder engine, spark between the electrodes will ignite the mixture. The detector could tell the spark plugs from the Bad by the strength of the spark.
Features:
Car tester detector with dual testing holes.
Can be used to test performance and ignition strength.
Apply to Gasoline car spark plugs.
With it, you can test two spark plugs meanwhile and if you suspect any works improperly, you could compare and test to make accurate judgment.
East to operate and testing.
How to Use:
1. Place the into tester hole 1 or 2; If you want to compare the new and old , place new into hole 1 and the old on into hole 2;
2. Connect to -;
3. Turn the switch 4 clockwise to turn on tester, indicator 3 will light up, tester is now working at 1000rpm/min.
4. Again turn the switch 4 clockwise, you can adjust the working frequency between 1000rpm to 5000rpm/min. The higher the frequency, the the spark strength.
Specifications:
Adapter: Plug
* Input: AC
* Output: 1A
Item Size: 145 * 85 * 40mm / 5.71 * 3.35 * 1.57in
Package Size: 200 * 100 * 70mm / 7.87 * 3.94 * 2.76in
Package Weight: 350g / 12.35ounce
Notes:
1. Please Turn Off before you place .
2. The Tester is a high-voltage detector, so please do not   with hand at work for avoiding danger.
3.This product is suit for 10mm only.
Package List: K13294
1 * Tester
1 * Adapter