Car Engine Intake Pipe Valve Cleaning Machine Automotive Carbon Deposition Clean

Description

Car Engine Intake Pipe Valve Cleaning Machine Automotive Carbon Deposition Clean
AUTOOL HTS558
walnut powder engine Intake pipe valve clean machine is a advanced equipment for clean engine intake carbon deposition. Keeping engine in healthy status, make sure engine provide high quality power constantly.
What is walnut powder(sand)?
Crash walnut shell into powder, after a vigorous selection process then we get walnut sand.
It show high performance in the three area: hardness, anti-pressure, wear-resisting.
A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive.
How to use?
1.Open head cover of AUTOOL HTS558 and pour into walnut powder (need 2-4KG ), press dust guard on walnut powder then close coveroin spary gun muzzle and recycle hose together (there is a hole on recycle hose).
2.Remove intake manifold of engine, plug spary gun into intake, turn crankshaf to close intake valve. Connect high pressure air pump((not include)) to HTS558.
3.Connect AC power, start clean. The process should last 1-3 minutes(depending on carbon deposition circumstances).
4.Close AUTOOL HTS558, check up cleaning result. Normally, walnut powder can be reuse 5-10 times(depending on carbon deposition circumstances).
Car DE-Carbon Cleaning Experts
Carbon deposits lead to engine idling instablity, insufficient air intake,power down,acceleration weakness. HTS558 helps you clean the carbon deposits effetively restoring your car to a healthy engine.
AUTOOL HTS558 is a special machine for engine Intake pipe and intake valve back side clean. Close intake valve, then spray walnut powder into engine intake via air pump(not include), meanwhile HTS558 will recycle walnut powder by vacuum. This is a closed loop. Walnut powder will impact carbon deposition on inner wall of intake pipe. After thousands of impact, carbon deposition will be clear thoroughly.
Deep Removal Of Carbon Deposits
Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.
AUTOOL HTS558 is specail for intake pipe and intake valve back side clean only, if you want to clean carbon deposition on injector/throttle valve/cylinder, please choose AUTOOL CT150,AUTOOL CT200 or AUTOOL C100. Walnut powder not include in package,please get it in local market; High pressure air pump is requirement(not include in package); Walnut powder residual in intake pipe will go to ashes in high temperature after engine start.
Built-In Dust Filter
It can separate the recovered walnut sand grit from carbon deposits for recycling.
External Air Source
This enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.
Recommend
1.Air pump pressure should more than 0.7Mpa (7bar/102PSI)
2.Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB)
3.Cleaning time between 1-3 minutes
Package include
1x AUTOOL HTS558 unit
2x Spray gun
1x Goggles
1x Recycle hose
1x Recycle hose and spray gun connector
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1. We accept PayPal only.
2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal (You don't need a PayPal account)
3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable
4. Please make the payment within 3 days.
Delivery details
1. Item will be shipped out within 5 working days (except weekends and holidays) after the payment is cleared or received.
2. We will send item to your Confirmed Shipping Address in Paypal only.Please confirm your order and address before you bid or pay the item.
3.International Buyers Please Note: 1)Please check with your country customs office to determine what these additional costs will be prior to bidding / buying.
2)Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.
Terms of sales
Item may be returned for refund or replacement within
30 days
of the purchase date. Returned merchandise must be unused, in original packaging and include all accessories. Shipping costs are non-refundable.
Defective products may be returned for repair up to
1 year
from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.
Before any return, a Return Merchandise Authorization (RMA) must be obtained by contacting the seller. Any products returned to us without an RMA will be sent back to the buyer at his/her expense.
About us
We are a professional worldwide company, with own factory located in China.We are reliable supplier to both wholesalers and retail sellers. We supply many products on Automobile consumer. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
It now own four stocks in the world: China warehouse, US&DE warehouse . it is now one of the biggest online commercial corporations in China.
Contact us
Our normal business hour is
Monday to Friday 9:00 AM to 6:30 PM Beijing TIME
. Please email me through "MY MESSAGES" on eBay, if you have any questions about our listings or inventory or troubles. All messages be reply within 24hours.
Welcome your any-time parchase!