Big Dog Motorcycles primary & inspection cover gasket set all 2005-11 models OEM

Description

NEW OEM BIG DOG MOTORCYCLES DSSC
OUTER PRIMARY O-RING AND INSPECTION COVER GASKET KIT
.
FITMENT IS FOR
ALL 2005-2011 BIG DOG MODELS RSD WITH A DSSC TRANSMISSION.
KIT INCLUDES ALL AS PICTURED-
LARGE
SQUARE O-RING
FOR OUTER PRIMARY AND COMPOSITE FIBER GASKET FOR INSPECTION COVER / ACCESS PLATE
.
Inspection Cover Gasket and Main Seal O-Ring to seal the inner and outer primaries together. It will fit all Big Dog models between 2005-11.
BOTH ITEMS ARE
U.S.A. MADE!!!!
**** FIBER GASKET MADE BY INTERFACED PERFORMANCE STAMPED TN-9015.
INSPECTION GASKET MADE BY INTERFACED PERFORMANCE STAMPED TN-9015.  THIS GASKET MATERIAL IS AN UPGRADE OVER THE ORIGINAL GASKET MATERIAL.  THIS MATERIAL IS A BETTER SEALING GASKET WHICH SWELLS OVER TIME TO FILL VOIDS.
Material Description:
TN-9015 has a latent cure nitrile butadiene rubber binder and has a blend of Aramid and cellulose fibers. It conforms well to irregular flange surfaces and has excellent resistance to fuel and oil. It is intended for applications with short duration maximum temperatures up to 290°C (550°F). TN-9015 has UL component recognition.
Specification Properties:
Property
Value
Method
Density, g/cc(lb/cu.ft)
1.28 (80) (min.)
ASTM F 1315
Compressibility, % (at 34.5Ma)
12-27
ASTM F 36
Recovery, %
30 (min.)
ASTM F 36
Tensile Strength, AMD, MPa(psi)
10.34 (1500) (min.)
ASTM F 152
Fluid Resistance IRM903 Oil
ASTM F 146
Change in Tensile Strength, %
50 (max.)
Change in Thickness, %
25 (max.)
Fluid Resistance, Fuel B
ASTM F 146
Change in Thickness, %
25 (max.)
Change in Weight, %
35 (max.)
Binder Type
Nitrile Butadiene
Remarks and Related Documents:
Specification values determined by the test methods required for ASTM F-104, Type 7 materials.
ISO 9001: 2015 Registered
Check out my
other items
!
Be sure to add me to your
favorites list
!
We have been selling Big Dog Motorcycle parts on ebay since 2003. We started as the original Big Dog factory liquidation outlet, then progressed to the exclusive contract buyer for all surplus parts from the factory including new overstock.
When the company was foreclosed on in 2013, we purchased the remaining inventory and all of the original tooling from the bank. Since then, we have continued to manufacture new Big Dog Motorcycle parts with most of the original vendors using factory O.E.M. specs and materials. We have also upgraded some old parts and developed new parts in the manufacturing process.
Call Donna for any questions6202572009