Autool Automotive Engine Intake Valve Carbon Clean Sand Blasters Decarbonizing

Description

Store category
Sign Up Now !
You may also like
Autool Automotive Engine Intake Valve Carbon Clean Sand Blasters Decarbonizing
Product Description
Description:
AUTOOL HTS558
walnut powder engine Intake pipe valve clean machine is a advanced equipment for clean engine intake carbon deposition. Keeping engine in healthy status, make sure engine provide high quality power constantly.
AUTOOL HTS558
Automotive Engine Intake Pipe Valve Clean Machine Valvetronic System Walnut Powder Sand Carbon Deposition Cleaner.
AUTOOL HTS558
is specail for intake pipe and intake valve back side clean only, if you want to clean carbon deposition on injector/throttle valve/cylinder, please choose
AUTOOL CT150,AUTOOL CT200 or AUTOOL C100.
Walnut powder not include in package,please get it in local market; High pressure air pump is requirement(not include in package); Walnut powder residual in intake pipe will go to ashes in high temperature after engine start.
Carbon deposition &
walnut powder sand
Why need clean carbon deposition?
Carbon deposition will decrease air-fuel ratio, cut down engine output power, increase fuel consumption, engine drastic shake on idle status...all the thing will hurt engine deeply. So normally we should clean carbon deposition after every 40000-50000 kilometer trip
What is walnut powder(sand)?
Crash walnut shell into powder, after a vigorous selection process then we get walnut sand. It show high performance in the three area: hardness, anti-pressure, wear-resisting. A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive.
It was hardly dissolved in acid, alkali and water.
Walnut sand is a pure natural polish material, its hardness was lower than metal but higher than carbon deposition, it will clean intake pipe and back side of intake valve thoroughly but no damage
Recommend:
1 Air pump pressure should more than 0.7Mpa (7bar/102PSI)
2 Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB)
3 Cleaning time between 1-3 minutes
Feature:
Carbon Deposition- There are some hydrocarbon olefin residues attach on engine intake, cylinder when fuel burn in engine not completely. These residues change into hard black shell in high temperature condition , that called carbon deposition. Carbon deposition will decrease air-fuel ratio, cut down engine output power, increase fuel consumption, engine drastic shake on idle status...all the thing will hurt engine deeply. So normally we should clean carbon deposition after every 40000-50000 KM.
AUTOOL HTS558 is a special machine for engine Intake pipe and intake valve back side clean. Close intake valve, then spray walnut powder into engine intake via air pump(not include), meanwhile HTS558 will recycle walnut powder by vacuum. This is a closed loop. Walnut powder will impact carbon deposition on inner wall of intake pipe. After thousands of impact, carbon deposition will be clear thoroughly
Chemical cleaning agent will corrodes pipe and shortens the lifetime of engine.
Walnut powder is pure natural polish material. It show high performance in hardness, anti-pressure and wear-resisting. Walnut powder hardness was lower than metal but higher than carbon deposition. Take these advatages, AUTOOL HTS558 will clean clean intake pipe and back side of intake valve thoroughly but no damage
High-precision engine system is sensitive to foreign matter of intake pipe, such as BMW valvetronic system. That is why we need AUTOOL HTS558 to clean carbon deposition in intake pipe. Engine should be closed before clean, then turn crankshaft to close intake valve. AUTOOL HTS558 clean one intake pipe
each time, 6 cylinder engine should cleaned 6 times one by one(and so on)
How to use?
1) Open head cover of AUTOOL HTS558 and pour into walnut powder (need 2-
4KG ), press dust guard on walnut powder then close cover
2) Join spary gun muzzle and recycle hose together (there is a hole on recycle
hose)
3) Remove intake manifold of engine, plug spary gun into intake, turn crankshaft
to close intake valve. Connect high pressure air pump((not include)) to
HTS558
4) Connect AC power, start clean. The process should last 1-3
minutes(depending on carbon deposition circumstances)
5) Close AUTOOL HTS558, check up cleaning result. Normally, walnut powder
can be reuse 5-10 times(depending on carbon deposition circumstances)
Package include:
1x AUTOOL HTS558 unit
2x Spray gun
1x Goggles
1x Recycle hose
1x Recycle hose and spray gun connector
Payment
Delivery details
Return Policy
About us
Contact us
Payment
1. We accept PayPal only.
2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal (You don't need a PayPal account)!
3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable !
4. Please make the payment within 3 days
.
Delivery details
1. We ship to WORLDWIDE
2. Item will be shipped out within
1-2 working days
(except weekends and holidays) after the payment is cleared or received.
3. We will send item to your Confirmed Shipping Address in Paypal only.Please confirm your order and address before you bid or pay the item.
4. Usually the standard service delivery takes 15-20 working days (except weekends and holidays),If you don't receive the item in time, please contact us freely, we'll try our best to solve the delivery problem.
5.International Buyers Please Note:
1) Please check with your country customs office to determine what these additional costs will be prior to bidding / buying.
2)
It's the buyer's responsibility to complete clearance when parcel reached your Customs. We are Not responsible for buyers's local taxes, please consult local Customs for Tax Details. Customs rates vary from country to country, please understand.
6. If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated!
7. Any further queries, please don't hesitate to email us. Thank you.
Return Policy
1. Please do not hesitate to leave us your 5 Star
★★★★★
of DSR positive feedback if you are satisfaction with our products ,delivery or services .
2. If you have Any Questions Or unsatisfied with your purchase, please email us first to get a better solution before you leave a neutral or negative feedback, we work hard to make sure every customer 100% satisfied and resolve anyproblem for you.
Thank you for your kindness.
Defective products may be returned for repair up to 1 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.
About us
We are reliable supplier to both wholesalers and retail sellers.And we are a professional Authorized dealers of
Launch,Autel,Autool
And
Autool Product Warranty For 3 years
，Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
We supply many products on Automobile consumer. We have OBDII cars / Light Trucks / Heavy Duty Truck's ,
Battery Tester, Fuel Injector Cleaner Machine , Smoke Leak Detector Machine, Digital Circuit Tester, lgnition Spark Tester , Engine Timing Tool
, and much more others products.
Contact us
1. If you have any further queries, you can feel free to email me via email or eBay message. Thank you.
2.
Please email us first before giving negative feedback or opening a case. Wish we can solve the problem peacefully
.
3. Much appreciated if you could leave us positive feedback with five stars.
4. We will reply you within 12 hours and do our best solve the problem with you （Except on Weekends and
Holidays）
Work time:Monday to Friday GMT8 (9:00am-18:00 PM)
Feedback