110V Car Engine Carbon Deposition Cleaner Walnut Intake Pipe Valve Clean Machine

Description

Store category
Sign Up Now !
You may also like
110V Car Engine Carbon Deposition Cleaner Walnut Intake Pipe Valve Clean Machine
Product Description
AUTOOL HTS 558 Walnut Sand Decarbonizing Machine is sprayed into the engine intake pipe through high-pressure airflow, and the high-pressure high-speed sand will roll and collide in the closed intake pipe, thereby impacting the carbon deposit on the intake valve and the cylinder wall. Then, the walnut sand and carbon deposit mixture are recycled to the dust bucket through a special joint.
Operation method:
1. Open the outer packing to check if there is any breakage in the Parts.
2. Gently remove the parts and the whole machine, and install the parts according to the following steps.
(1) the pellet tube will be recycled and connected with the Host.
(2) put the push rod mounting bracket in place with the host as Required.
(3) The push rod is connected with the plunger column as Required.
(4) from the upper end of the host head to open the two ends of the lock, gently put the machine head according to the requirements to check the recovery of the particle filter is SOLID.
(5) Check whether the filter is displaced as Required.
(6) After the inspection pass the particle diameter 0.4-0.8mm The walnut sand granules gently into the main barrel, the particle weight in the 2-4kg, in order not to exceed the screen height is Appropriate.
(7) gently replace the machine head to the host, locking the two ends of the lock Buckle.
(8) Mobile host to use the site will be no less than 0.7MPa of compressed air according to location access to the Host.
(9) take good goggles in case the splash hurts your eyes.
(10) connect the plug to the 220v/55hz power supply.
(11) The recycled pellet joint is connected to the recovery pipe to the workpiece to be cleaned.
(12) Open the host switch, in order to ensure the quality of recycling, we recommend the use of high-grade sand material. (13) the removal of carbon from the injection port on the recovery of the particle connector inserted, the removal of carbon grab switch, began to enter the carbon removal Program. In order to cooperate with different occasions to clean up the different workpiece, please combine the actual situation to adjust the bottom throttle valve, to ensure that the shooting speed in the best state, to ensure that the carbon removal is perfect without hurting the workpiece.
Product structure diagram:
Suction Sand mouth, Lock buckle, putter, gear switch, washing machine mainframe, sandblasting gun head hose, washing machine head, Putter column, The direction of the front wheel, fixed rear wheel.
Crash walnut shell into powder, after a vigorousselection process then we get walnut sand. lt show high performance the three area:
hardness,anti-pressure,wit A large amountof pores on surface of walnut sand which providesuper adsorption capacity,. non-toxic and corrosion preventive.
It was hardly dissolved in acid, alkali and water
Walnut sand is a pure natural polish material, polishcylinder with walnut shell willclean engine thoroughly but no damage.
High pressure air inlet port:
High pressure air provide strong power forwalnut sand impacting, clean engine moredrastically.
Package includes:
Washing Machine * 1
Filter Net * 1
Filter * 1
Sieve Net * 1
Sand Blasting Rob * 1
Goggles * 1
Sand Suction HOSE Connector * 1
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept paypal only. Please make sure payment is made within 4 days of the end of auction, or UPI Strike will be filled with eBay. We will ship out your item very soon after we receive your payment.
Delivery details
For US buyers
, Usually we use E-packet, sometimes DHL/EMS and other Excellent Service is used per customers' request.
For those who are outside US
, HK POST/SG POST/ DHL /EMS ect. will be used. It all depends on our customers' choices
.
But pls be known that Different shipping service means different shipping charges and shipping time!
! But
All packages are added with tracking number.
The item will be shipped directly from the
factory
We try our best to give customers' good buying experience. Hope we can deal with soon and let us witness this moment.
Terms of sales
Warranty:
1. 6 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items MUST BE reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.
3. For a free copy of the warranty, please message to us.
For international buyers
Import duties, taxes and charges are not included in the item price or shipping charges.There charges are the buyer's responsibility
Pls check with your country's Customs Office to determine what these addition costs will be prior to bidding /buying
About us
Welcome to our store! We are Mrcartool, a professional automotive repair and maintain enterprise. Our own factory and chain repair shop located in China. We supply many products on Automobile consumer electronics, such as coder reader, diagnostic tool, GPS, DVR, bluetooth Car kit, injector cleaner and battery system tester etc. High product quality, reasonable prices, excellent customer service and a reliable credit standing is our target.
Contact us
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. pls contact us immediately
Before
you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
It is impossible to address issues if we do not know about them! Thank you!
Feedback